A LED Driver is an electrical device, used to power a light-emitting diode (LED), that protects LEDs by stabilizing the quantity of incoming electrical voltage and current to make sure they don’t surpass the maximum voltage rating.
Complex current source circuits require a LED driver when driving high-power LEDs for illumination to achieve correct current regulation.
A LED driver responds to the changing needs of the LED, or LED circuit, by providing a constant quantity of power to the LED as its electrical properties change with temperature.
Without the proper driver, the LED may become too hot and unstable, therefore causing poor performance or failure.
Specifications
- Input voltage: 170-265V 50/60Hz
- 12V DC constant voltage LED driver
- Output voltage: 12V DC
- Wattage: 50W
- Current: 4.17A
- Load: 5W - 40W
- Minimum Load Per Cable: 5W
- Maximum Load Per Cable: 20W
- Short circuit, overload and thermal protection
- Built in Active PFC function
- Ambient temperature: -30 to 50°C
- Flex & plug included: 1.2m
- IP rating: IP67
Dimensions
- Height: 46mm
- Width: 71mm
- Length: 178mm
Complex current source circuits require a LED driver when driving high-power LEDs for illumination to achieve correct current regulation.
A LED driver responds to the changing needs of the LED, or LED circuit, by providing a constant quantity of power to the LED as its electrical properties change with temperature.
Without the proper driver, the LED may become too hot and unstable, therefore causing poor performance or failure.
Specifications
- Input voltage: 170-265V 50/60Hz
- 12V DC constant voltage LED driver
- Output voltage: 12V DC
- Wattage: 50W
- Current: 4.17A
- Load: 5W - 40W
- Minimum Load Per Cable: 5W
- Maximum Load Per Cable: 20W
- Short circuit, overload and thermal protection
- Built in Active PFC function
- Ambient temperature: -30 to 50°C
- Flex & plug included: 1.2m
- IP rating: IP67
Dimensions
- Height: 46mm
- Width: 71mm
- Length: 178mm